Engineering Studies
The projects of Masc Ingenieros Consultores consist of different types, among which you can find Heritage, Port and Building works.
The projects of Masc Ingenieros Consultores consist of different types, among which you can find Heritage, Port and Building works.
COPIAPO – Atacama Region
Surface: 79,575 m2
Principal: Ministry of Public Works
CHEMICAL PLANT
CODELCO SALVADOR DIVISION
A complete soil mechanics study was carried out whose main tests were:
Soil classification
Seismic classification
In situ density
Granulometry
Client: Pro Éxito
POTRERILLOS FOUNDRY
CODELCO SALVADOR DIVISION
Floor slab concrete sample extraction works were carried out. The drilling site was on an uneven, highly contaminated surface. 8 samples of diameter 100 mm were extracted, the objective of this extraction was to verify if under this slab the undermined ground was found.
Client: DH SIGA
TALCA – Maule Region
Surface: Approx. 10,000 m2
Principal: Ministry of Public Works
POTRERILLOS FOUNDRY
CODELCO SALVADOR DIVISION
An electrical study was carried out with the purpose of regularizing the existing electrical installations, the studies were:
Protection coordination
Load analysis
Incidental energy studies (arc flash)
Short circuit analysis
Principal: JEJ
HYDROMETALLURGICAL PLANT
CODELCO SALVADOR DIVISION
The extraction of concrete cores was carried out in the walls and slabs of the primary crusher to determine their compressive strength.
Principal: JRI.
TALCA – Maule Region
Area: 700 m2
Principal Ministry of Public Works
CONCENTRATOR PLANT
CODELCO SALVADOR DIVISION
It consisted of carrying out destructive and non-destructive tests to determine and verify the physical conditions of the structures and to be able to generate planimetric details and corroboration of measurements.
Principal: DHSIGA
A structural inspection was carried out for the town hall building to respond to the comptroller’s report on the quality of concrete and steels used in the construction process of this work, the following tests were carried out:
Extraction of concrete samples
Modulus of Elasticity
Armor scan
Mandate: Municipality of Freirina O’Higgins
CODELCO SALVADOR DIVISION
Surface: Approx. 27,000 m2
Spring: DHSIGA
CONCENTRATOR PLANT
CODELCO SALVADOR DIVISION
Concrete core extractions were carried out in the concrete supports of the bar mills to determine their compressive strength.
Principal: JRI
Reinforcement auscultation was carried out at different points selected by the client to determine the amount, diameter, spacing in two directions and depth of reinforcement. The lifting of reinforcement was carried out with a reinforcement scanner in order to generate the least possible impact to the structure at other points, extraction of concrete cores was carried out by the ATYLAB laboratory.
Client: ATYLAB Laboratory
